WSGF Mini Mega Desk Stand v2

Submitted by skipclarke on 26 January, 2015 - 15:14

 
$649.00
SKU: 100-D28-B25 (WSGF)

We are currently out of stock on the custom parts needed to make this stand. We expect to have completed kits back in stock by 22-May-17. We will ship any open orders at that time.

This is a new custom SKU, based on the WSGF Mega v2. It is a smaller version version of the Mega, and offers only a single "Mega" bar.

The Mini Mega version of the stand distributes the monitor weight across two heavy duty bases. This helps ensure stability of the entire installation, and the two clamp points greatly reduce the flexing of the arm (from the weight of the monitors).

The Mini Mega offers a "middle ground" (between the Ultimate v2 and the Mega v2) for supported monitor configurations. It can support larger monitors like the Mega v2, but doesn't support 4 (1+3) or 6 (2x3) panel configurations. The stand can support, 3 or 5 (2+3 or 5x1-P) monitors. Using either the short or tall poles, and one Mega Bar, the stand can support up to 3x 32" monitors.

The WSGF Mini Mega allows for a wide range of monitors in its "basic" 3x1-Landscape configuration. The stand allows for Ultra HD 4k monitors up to 32" in size, as well as 21:9 ultra-wide up to 29". When used with the "tall poles" two additional monitors can be placed over the standard "3x1-Landscape" arrangement. The stand will allow for 27" in 5x1-Portrait, using panels that have a narrow bezel. (You can purchase the 36" or 48" poles from Ergotech, which will support 2+3 config with 32" panels.)

  • Triple Widescreen: 3 x 30" (2560x1600)
  • Triple 4k UHD: 3 x 28" or 3 x 32" 4k UHD (3840 × 2160)
  • Triple Ultra-Wide: 3 x 29" (2560x1080)
  • Mixed-Mode Triple: 27" 16:9 (L/R) and 34" 21:9 (Center)
  • 5x1-Portrait: 3 x 27" (2560x1440) with thin bezels

The picture to the right shows the full configuration - two bases, two short poles, two tall poles, custom "Mega" arm, and five pivots.

PLEASE NOTE:Due to the spacing of the pole clamps, and the curved nature of the bar, wall mounting is generally not an option. This is specifically true when attempting another into wall studs on 16" centers. Wall mounting may be possible in other materials (such as cinder block or masonry) where custom spacing is possible. With proper planning, the custom WSGF "thru desk" mounts may be used.

Check out the Reviews Page to see what people have said about the Ergotech and WSGF Edition Stands.

The shipping package includes:

  • 2x Heavy Duty Base
  • 2x "Short" Pole (16" height)
  • 2x "Tall" Pole (28" height)
  • "Mega" Five Segment Bar" (two clamp points, with custom 16" outer wings)
  • 2x "Mini Bar" (used to mount the "1" in "1 over 3" configurations)
  • 5 Pivots (1 standard, 4 adjustable)

Please Note: If you are planning to mount a 34" ultra-wide panel, you will also need to purchase an HD Adjustable Pivot.

Pic

It also includes the following items, which are pictured to the right.

  • 26 cable clips - 6 pole clips, 20 bar clips
  • Alignment Tools - protractor and level
  • 2x Neoprene base pad


Technical Specifications

The stand weighs approximately 60 pounds, fully loaded with four pivots. Each base measures approximately 18" square. It supports the following monitor specifications.

  Total Bar Weight 1+3 Total Weight 3x1-L Width* 5x1-P Width* 1+3-L Height* Price**
WSGF Edition Ultimate 75 lbs 125 lbs 29.5 in 15.0 in 16.0 in $749
*These measurements are the physical height and width of your monitors - NOT the diagonal viewable area. Please measure your monitors. **Street price.



Shipping & Handling

This product is a beast to ship. In general, we pack everything in two of the standard WSGF Ultimate boxes, and then "over box" that into a single parcel. (See pictures in forum discussion thread). This is preferred for US shipments, but is an absolute requirement for overseas shipments. The boxed item weighs 66 pounds, and the over boxing and packing ensures it arrives safely without being damaged, or the inner boxes being damaged.

We are set up to ship product within North America, Australia, New Zealand, European Union, Hong Kong, Japan, and select countries in the Middle East - Qatar, Kuwait, Saudi Arabia, and the United Arab Emirates. Additional shipping arrangements can be arranged on a per order basis.

S/H costs cover the actual shipping costs, the cost of boxes and tape and other fees associated with the processing of the order. S/H costs are set based on a geographical average. We do monitor costs, and adjust according to changes in transportation costs. In general this has led to reduction of costs for shipping for our international customers.

PLEASE NOTE: Customers are responsible for any import taxes and fees required. These fees or taxes are not included in the product price or shipping costs. If you need a unique invoice to account for import fees and/or taxation, so that you can claim these within your country, please let us know. We will be happy to provide specific documentation and paperwork as needed.

Shipping costs are as follows:

  US CAN US APO/FPO ANZ EU UK ME JP/HK
Cost $55 $200 $150 $400 $250 $300 $300 $350
Ship Method UPS (Continental US). All others USPS Global Priority.


Repairs & Refunds

TL;DR
Ergotech offers a Lifetime Warranty on their stands. Repairs are rare. We can, and will work to resolve any and all issues with your stand. For full details, visit the Repair & Refunds page.


Installation

  • USE COMMON SENSE
  • PDF Installation Instructions for "Base Model" Freedom Triple Stand from Ergotech (the basis for this SKU)
  • Don't do anything that will cause the stand to tip over
  • ALWAYS load from the center out, and the bottom up
  • After you have the center monitor installed, take time to check the height (before adding additional monitors)


We are currently out of stock on the custom parts needed to make this stand. We expect to have completed kits back in stock by 22-May-17. We will ship any open orders at that time.


Price: $649.00