Widescreen Gaming Forum :: View topic - Monitors that will and won't run at 5040x1050 @ 57hz

Widescreen Gaming Forum http://www.wsgf.org/phpBB3/

Monitors that will and won't run at 5040x1050 @ 57hz http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=16258	Page 1 of 28

Author:	allanstrings [ 10 Sep 2008, 00:53 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
Admin Update 19-Nov-09: I am working to overhaul the Master Monitor List. Going to stop doing the individual monitor pages, and expand the info on the list itself. I have added a column for 57Hz support. You can see it by clicking on the "Monitors" link in the left nav. KNOWN WORKING AND NOT WORKING MONITOR LIST FOR 5040x1050 @ 57HZ HUGE thanks to allanstrings* for starting this idea. You can find his original message/idea in the third post down.* When you are 100% sure one way or another please post in this format ... KNOWN WORKING: Samsung 2043BWX or PROBLEM MODEL: Acer P241wb Any additional information about the symptoms/functionality of the monitors would be greatly appreciated. ------------------------------------------------- Monitors are organized alphabetically by Manufacturer. Exact model numbers are listed, along with any additional notes about the functionality of the monitor LAST UPDATE [scavv] : 14 November 2009 [list]Problem models: []Acer AL2216W :?: (Although tested OK @ 1680x1050@57hz)[/:m] []Acer B223w (3x 1680 results in 3x 1280)[/:m] []Acer H243Hb Mid[/:m] []Acer P241wb[/:m] []Acer P223W (VGA)[/:m] []Acer V223W (3x 1680 results in 3x 1280)[/:m] []Acer x193w+[/:m] []Acer X203W+variants[/:m] []Acer X223W[/:m] []Acer X233H [/:m] []AG Neovo H-W22 :?: (user couldn't do 5040, though it's not entirely clear that a single one won't display 1680@57) [/:m] []Asus VW223T[/:m] []Asus VW222U [/:m] []BenQ FP222W :?: (1680x1050@58Hz appears to be the minimum)[/:m] []BenQ G2400WD/T [/:m] []Dell 2007WFP [/:m] []Iiyama E2207WS [/:m] []Samsung 2233BW (works at 1680x1050@57 Hz for 30 secs, then an OSD message pops up and the screen turns blank, no way to circumvent it)[/:m] []Samsung 2253LW (same issue) [/:m] []Sceptre X22wg-Naga[/:m] []Sceptre x22HG : "Sceptre Tech support said that no 22 inch monitors support the 57hz refresh rate. - blkraven"[/:m][/list:u] [list]Known working: []Acer P223W (DVI version ONLY)[/:m] []Acer P224W[/:m] []Acer X223Wabd [/:m] []AOC 2217v[/:m] []AOC 2434PW [/:m] []Asus VK222H[/:m] []Asus VW198T[/:m] []Asus VW224U[/:m] []Asus VW246H [/:m] []Benq E2400HD (VGA)[/:m] []BenQ FP202W[/:m] []BenQ FP241W[/:m] []BenQ G2000W [/:m] []BenQ G2200W[/:m] []BenQ G2412HD[/:m] []BenQ G2420HD [/:m] []Chimei CMV221D [/:m] []Dell 2001 FP[/:m] []Dell 2009W[/:m] []Dell 2208WFP ("I have to run the scaling at 1:1 for 5040x1050 to work properly. Otherwise it cuts off the bottom of the screen. 4320x900 (and everything else) is fine with "fill" scaling. The OSD shows 5040x1050 at 57Hz." - Ibrin)[/:m] []Dell 2209WA[/:m] []Dell 2405 FPW[/:m] []Dell 2407[/:m] []Dell 2408[/:m] []Dell E2009WFP (Affirmative from Dell Tech Support, but unconfirmed by users)[/:m] []Dell E228WFP[/:m] []Dell E248WFPb[/:m] []Dell SP2208WFP[/:m] []Dell U2410F [/:m] []DGM L-2249WD [/:m] []Fujitsu-Siemens Amilo SL 3260W (tested/used in combination with GTX295 and 182.06) [/:m] []Gateway FHD2401[/:m] []GE L1916HW [/:m] []HP 2207 [/:m] []LG L227wtg[/:m] []LG 227wtp-pf[/:m] []LG W2252TQ[/:m] []LG W2343T[/:m] []LG W2452V [/:m] []NEC MultiSync 20WGX2 [/:m] []Packard Bell Viseo 230WS (1080p monitor)[/:m] []Philips 220CW9 :?: (you may have to turn SmartImage off in the OSD first.) [/:m] []Samsung 2032MW (whistles at 57Hz?)[/:m] []Samsung 2043BWX[/:m] []Samsung 2053BW[/:m] []Samsung 220 WM [/:m] []Samsung 2243BWX (OSD Message initially. Press menu to clear.)[/:m] []Samsung 2253LW/BW (OSD Message initially.)[/:m] []Samsung 225BW[/:m] []Samsung 226BW Type A (OSD Mesage initially.)[/:m] []Samsung 226BW Type C modelcode LS22MEWSFV/EDC (no annoying OSD message!)[/:m] []Samsung 226 cw (OSD Message initially. Press menu to clear or wait 60seconds.)[/:m] []Samsung 2333SW (Possible degradation over time? [here] )[/:m] []Samsung 2433BW (GeForce 175.19 drivers.)[/:m] []Samsung 2443BW[/:m] []Samsung 2693HM[/:m] []Samsung T220 :!: (Xav: OSD Error comes up, I pressed the Auto Adjustment button on the monitor, hasn't come back (Been over 24 hours)[/:m] []Samsung T240HD [/:m] []Soyo DYLM24E6 [/:m] []ViewEra V202D a.k.a. V202D-B [/:m] []Viewsonic VA2216w :?: (1680x1050@57Hz works; The Beard reports no success @5040, but it's probably a driver/GXM issue)[/:m] []ViewSonic VA2226w[/:m] []Viewsonic VX1940w[/:m] []Viewsonic vx2025wm[/:m] []Viewsonic VX2235wm[/:m] []Viewsonic VX2240w[/:m] []Viewsonic VX2262wm [/:m] []VideoSeven V7 L22WD (Valk followed mattsimis's instructions to setup the custom res in nvidia cp) [/:m] []Westinghouse LCM-22W2[/:m] []Westinghouse LCM-22W3 [/:m] []Zalman Trimon 22" ZM-M220W[/:m][/list:u]

Author:	VentZero [ 10 Sep 2008, 02:29 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
well i cant help you with it but /signed such a list would really help

Author:	allanstrings [ 10 Sep 2008, 07:25 ]
Post subject:	original post
Original Message from allanstrings ... I recently upgraded my multi-monitor setup to include a DTH2G, and I love it, but one of my monitors cannot handle the 57hz refresh apparently. I have 2 Chimei CMV-221D 22" TN displays that work great, never had a bit of trouble from them and they run at just about any refresh i have tossed at them, and I have an Asus VW223T 22" that works very well at 60hz, but cannot handle anything else, despite the manufacturer's data saying it will do 56-75hz. When running at 57hz, it has terrible ghosting that is visible for over 5 seconds on bright colors, and the backlight flickers rapidly sometimes. I have never seen these problems when it was running standalone. I am going to move the Asus to the far right of my setup and use it for a TV/console display, and get another monitor for my center spot... however I haven't been able to get another matching Chimei (Newegg doesn't stock them anymore, and Ebay scares me for a monitor). With the Asus' specs claiming it can handle 57hz, and clearly unable to, I am worried about purchasing another monitor blindly. Can anyone vouch for a 22" that is confirmed working at this refresh? We should start a list of known working and non-working models to help out those who are system building so they can avoid this pitfall...

Author:	scavvenjahh [ 10 Sep 2008, 11:17 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
The "known working" list is a MUST, thanks for that :) Hopefully I'll be able to add the ViewSonic VX1940w (19" but 1680x1050) to it soon... crossing fingers and counting days before the mailman's coming

Author:	skipclarke [ 10 Sep 2008, 12:53 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
I can confirm that my VW198T would boot into Windows fine. Except that two of them were DOA, so only the left most showed. I could swap cables and pick up the 2nd and 3rd images for verification. Assuming it's 57Hz on the windows desktop, that one was good.

Author:	Mud [ 10 Sep 2008, 13:20 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
I believe the Samsung SM-2253LW will work, I set 1680x1050@57Hz and dualhead [email protected] I believe my 9800GT drivers are stopping me from confirming 3x1680x1050.

Author:	Stec [ 10 Sep 2008, 20:45 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
KNOWN WORKING: Samsung 2043BWX

Author:	Paddy the Wak [ 10 Sep 2008, 21:09 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
Great idea guys ... :D So ... When you are 100% sure one way or another please post in this format ... KNOWN WORKING: Samsung 2043BWX or PROBLEM MODEL: Acer P241wb I will then update the 3rd post. Ibrin is that 100% confirmation ? Mud ... I would need 100% confirmation from you too. Thanks guys.

Author:	skipclarke [ 10 Sep 2008, 21:31 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
I can 100% confirm that they worked.

Author:	Mud [ 11 Sep 2008, 22:17 ]
Post subject:	Monitors that will and won't run at 5040x1050 @ 57hz
Paddy, I've ordered a 280 so will hopefully confirm on Monday. In the meantime feel free to prune my posts.

Page 1 of 28	All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/