Widescreen Gaming Forum
http://www.wsgf.org/phpBB3/

Any succeed with ATI 5870 and TH2G?
http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=18442
Page 1 of 1

Author:  mikeyhd [ 23 Nov 2009, 15:34 ]
Post subject:  Any succeed with ATI 5870 and TH2G?

I know that Eyefinity work, but for now it's hard to find a Displayport adaptor and it does not work with CF (Crossfire)

But I have already committed to a 5870 CF, so any one have succeed for a 5040x1050 resolution with a 5870?

if not what is the maximum resolution you can get?

Author:  JohnMace [ 23 Nov 2009, 15:47 ]
Post subject:  Any succeed with ATI 5870 and TH2G?

I'm under the impression that a single dual-link dvi port can only support resolutions up to 2560x1600 (i.e. 4096000 pixels). If you're trying to do 5040x1050 - that's 5292000 pixels, well above the maximum that dual link dvi can support. You would have to drop the resolutions down a bit - 3x 1440x900 (4320x900 in total = 3888000 pixels - only just under) should work... 3x 1680x1050 would be too high.

Author:  Cygone [ 23 Nov 2009, 19:42 ]
Post subject:  Any succeed with ATI 5870 and TH2G?

I'm under the impression that a single dual-link dvi port can only support resolutions up to 2560x1600 (i.e. 4096000 pixels). If you're trying to do 5040x1050 - that's 5292000 pixels, well above the maximum that dual link dvi can support. You would have to drop the resolutions down a bit - 3x 1440x900 (4320x900 in total = 3888000 pixels - only just under) should work... 3x 1680x1050 would be too high.


Unfortunatly this above poster is incorrect for the most part

The maxium support for Dual Link DVI is limited by the allowed bandwidth, this is approximatly 5040x1050x32@57hz, (give or take on the Hz)

There are some other posts on here about getting a TH2G work with ATi 5000 cards but to no luck as of yet.

I do have access to 2x5850's and a TH2G but have not found the time to look into getting this to work either, once i do i will post my expericances on the other threads on this forum to the two technologies working together. If they can work together, it will be the solution that i will use for the near future so i can get Xfire to worh on tripple head, and get access to the bezel management and other features of the Matrox software.

ta

Author:  suiken_2mieu [ 23 Nov 2009, 20:56 ]
Post subject:  Any succeed with ATI 5870 and TH2G?

[quote]I'm under the impression that a single dual-link dvi port can only support resolutions up to 2560x1600 (i.e. 4096000 pixels). If you're trying to do 5040x1050 - that's 5292000 pixels, well above the maximum that dual link dvi can support. You would have to drop the resolutions down a bit - 3x 1440x900 (4320x900 in total = 3888000 pixels - only just under) should work... 3x 1680x1050 would be too high.


Unfortunatly this above poster is incorrect for the most part

The maxium support for Dual Link DVI is limited by the allowed bandwidth, this is approximatly 5040x1050x32@57hz, (give or take on the Hz)

There are some other posts on here about getting a TH2G work with ATi 5000 cards but to no luck as of yet.

I do have access to 2x5850's and a TH2G but have not found the time to look into getting this to work either, once i do i will post my expericances on the other threads on this forum to the two technologies working together. If they can work together, it will be the solution that i will use for the near future so i can get Xfire to worh on tripple head, and get access to the bezel management and other features of the Matrox software.

ta

I must also dis agree with you and saying that Mviewtech has used Duel-Link DVI and has reached that 5040x1050x32@60hz. But anywhere above that, it starts tanking in frequency.

Author:  JohnMace [ 24 Nov 2009, 03:59 ]
Post subject:  Any succeed with ATI 5870 and TH2G?

Oops I didn't get a chance to edit my post - I hadn't taken into account pixel depth or refresh rate.

With a good quality cable - the maximum should be around 5040x1050x24@62Hz (or 5040x1050x32@46Hz) - but that is almost on the limit of what the interface can handle on one dual-link DVI connection (7.92Gbit/s - interestingly HDMI v1.3 can go up to 10.3Gbit/s).

I must also dis agree with you and saying that Mviewtech has used Duel-Link DVI and has reached that 5040x1050x32@60hz. But anywhere above that, it starts tanking in frequency.


MView seem to be making use of two dual-link DVI connections thus can achieve higher resolutions/colour depth/refresh rates than using one dual link conneciton to TH2G. We're talking about different devices here.

Author:  mviewtech [ 24 Nov 2009, 13:26 ]
Post subject:  Any succeed with ATI 5870 and TH2G?

Oops I didn't get a chance to edit my post - I hadn't taken into account pixel depth or refresh rate.

With a good quality cable - the maximum should be around 5040x1050x24@62Hz (or 5040x1050x32@46Hz) - but that is almost on the limit of what the interface can handle on one dual-link DVI connection (7.92Gbit/s - interestingly HDMI v1.3 can go up to 10.3Gbit/s).

[quote]I must also dis agree with you and saying that Mviewtech has used Duel-Link DVI and has reached that 5040x1050x32@60hz. But anywhere above that, it starts tanking in frequency.


MView seem to be making use of two dual-link DVI connections thus can achieve higher resolutions/colour depth/refresh rates than using one dual link conneciton to TH2G. We're talking about different devices here.

Hi ,
our product use only one Dual link DVI to realize 5040x1050 60HZ resolution.
windows system have 8bit,16bit and 32 bit color to select. but this is different from 8bit,10bit ,12bit of DVI,HDMI and Displayport .

Best Regards!
Mviewtech

Author:  JohnMace [ 24 Nov 2009, 16:08 ]
Post subject:  Any succeed with ATI 5870 and TH2G?

Ahh you used two for that six monitor config... well I've confused myself thoroughly here.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/