Widescreen Gaming Forum
http://www.wsgf.org/phpBB3/

3 x32in lcd
http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=21518		 Page 1 of 1
Author:  bluboy [ 12 Feb 2011, 11:35 ]
Post subject:  3 x32in lcd
hi i tryed to setup th2go middle screen show windows back ground and the left and right look like there is no aerials plug in,the decktop icons are on the left screen because if u r luckly u can drag it to the middle screen. so why cant i get the two side screens to work, the screens r all the same 1920x1080p. windows xp and also running hd 5770 please help
Author:  scavvenjahh [ 12 Feb 2011, 11:57 ]
Post subject:  Re: 3 x32in lcd
First of all, please check your spelling ! Your post is really hard to read. :oops:
Secondly TH2G can only drive 3x 1680x1050 max... and with a Radeon, maybe even only 3840x1024.

Did you run Powerdesk GXM Wizard to setup the display ?
Author:  bluboy [ 12 Feb 2011, 12:18 ]
Post subject:  Re: 3 x32in lcd
sorry about the spelling just finished 15hrs at work,do you run the Powerdesk GXM Wizard before setting up th2go because if i hook up th2go first i can't see the screen that the icon/setup is on
Author:  suiken_2mieu [ 13 Feb 2011, 21:26 ]
Post subject:  Re: 3 x32in lcd
Just wondering, why not just run eyefinity? You will need an active single-link display port adapter, which will set you back about $30 off of newegg (or similar online retailer).
Author:  bluboy [ 13 Feb 2011, 23:15 ]
Post subject:  Re: 3 x32in lcd
i am running windows xp and i was told eyefinity will not work ?
Author:  suiken_2mieu [ 14 Feb 2011, 20:34 ]
Post subject:  Re: 3 x32in lcd
i am running windows xp and i was told eyefinity will not work ?

yeah, that's true...

My advice try outputting 3840x720 or 4080x 768 or 4098x768. Try it through powerdesk first, then try it though windows display utility.
Author:  icemanmelb [ 05 Mar 2011, 01:29 ]
Post subject:  Re: 3 x32in lcd
First of all, please check your spelling ! Your post is really hard to read. :oops:
Secondly TH2G can only drive 3x 1680x1050 max... and with a Radeon, maybe even only 3840x1024.

Did you run Powerdesk GXM Wizard to setup the display ?


Not according to the Matrox Website....

http://www.matrox.com/graphics/en/products/gxm/th2go/

Supports a maximum resolution of 5760x1080 (3x 1920x1080)1, 2 across three monitors; displays attached to TripleHead2Go must run at the same resolution

ice
Author:  scavvenjahh [ 05 Mar 2011, 13:23 ]
Post subject:  Re: 3 x32in lcd
True... and I didn't know that a month ago.
sorry about the spelling just finished 15hrs at work,do you run the Powerdesk GXM Wizard before setting up th2go because if i hook up th2go first i can't see the screen that the icon/setup is on
Nope, you must connect TH2G first. If you can't see the tray icon, you can start GXM from the start menu, or explore your Matrox installation folder to find it. You can also change your resolution to your native single-screen one before you launch the Wizard...
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/