MR100 hardware Graphic Rotation module is a stand alone graphic/video rotation module. It can do real-time graphic rotation on its input image from its HDMI（HDCP enabled）/DVI-D input interface and output the rotated image to its two DVI-I (DVI plus VGA) outputs (Two outputs identical). Its rotation angle can be set by per degree accuracy. Unlike other devices use scaled image as the rotation output, MR100 features non-scale rotation, which means no pixel scale will be added to the rotated image. All programmable parameters is non-volatile and can be stored its internal Flash memory and automatic loaded when power-on. It is fully external and standalone implemented with programmable hardware which makes this device has no burden to CPU and has no harm on the GPU 3D performance. MR100 can be easily controlled by serial port which is convenient for engineering usage, customer only need to set rotation parameters on PC host software with easy-to-use Graphic User Interface and the configuration will be downloaded to MR100. Multiple MR100 can be used together to make specially screen layout or special projection..
※ Full hardware real-time image processing engine, which adds no burden to CPU and has no impact on the GPU’s 3D acceleration performance.
※ Input HDCP enabled, direct connection to Blue-ray HDMI output. Output DVI and VGA both OK.
※ Internal 4:4:4 high accuracy processing, real-time rotation with ultra low latency, non-scale pixel accurate rotation.
※ Portable designed; Low power consumption, no need of heat sink, Environmental friendly.
※ Support 120Hz 3D stereo projection for 1024x768@120Hz
※ Industrial class design, high reliability and low environmental requirement, which is suitable for long-term continuous working.
※ Full external design providing an easy upgrade option of current projector system.
※ Two identical video output for easy video signal monitor
※ Easy start-up and setup.
