Widescreen Gaming Forum

it doesent work for me again.
Nothing has changed.

ftp://ftp.matrox.com/pub/mga/archive/GXMVEOS/2009/v32_gxm-veos_2_06_00_026_whql.exe

ftp://ftp.matrox.com/pub/mga/archive/GXMVEOS/2009/v64_gxm-veos_2_06_00_026_whql.exe

nothing...

sigh

I AM DONE WITH MATROX!

Newegg just informed that they are now in stock of ATI's latest (5870 I believe) card is in stock. Eyefinity here I come!

I downloaded the anticipated GXM 2.06 for my Windows 7 32bit.

In a word........"FAILED"

It was the exact same as GXM 2.05. I was looking for a new monitor
driver in this as well. I used the proper procedure to find the new
driver from the GXM 2.06. It still shows up as the same old driver
1.0.0.6 from November of 2008. The date of the GXM driver is April 2009.

I DO NOT GET IT. ALL OF US ARE LOOKING FOR A SOLUTION TO GET
WINDOWS 7 32 BIT WORKING IN 5040X1050. Yes, I have seen others
who state they got late drivers working with Windows 7, but that is
for the 64bit version. This is NOT WORKING for the 32 bit version.

It seems that GXM 2.06 works the same as GXM 2.05.....FAILED.

My question to everyone is this: Is our problem a failure of NVIDIA drivers
or Matrox drivers / software. I ask this since I am able to get Windows 7 32 bit working in 5040x1050 using NVIDIA 182.50 drivers and GXM 2.04.
This would not be a problem except AERO DOES NOT WORK when this
resolution is used. It only works when I lower the resolution back down.

NOTE: I always follow a strict procedure to remove all of my video card
drivers in safe mode using driver sweeper before installing any new video drivers. I then installed the GXM 2.06 software and followed up checking to see
if the monitor driver is installed. I have the latest firmware already.

If anyone gets this working as a fluke, please share your story.

Good Luck!!

Well ive got a chance to clean install 7 64 bit.... i may just give it a try :D

Now running Windows7 64bit on 5040x1050x59Hz!
Had to go to new Matrox software and Nvidia 182.50 Driver.. and it Runs..

Suspect it's now driver related..

182.5 is a Vista Driver.. had to force it to take it.. but it was not straight forward, So it's possible to do it, it's just not too easy..

Now running Windows7 64bit on 5040x1050x59Hz!
Had to go to new Matrox software and Nvidia 182.50 Driver.. and it Runs..

Suspect it's now driver related..

182.5 is a Vista Driver.. had to force it to take it.. but it was not straight forward, So it's possible to do it, it's just not too easy..

Wouldn't run on 191.07? Mine is, but I know a heap of people for who it does not, such a mystery.

_________________
i5-2500K @ 4Ghz ° Asus P8Z68 ° GTX670 Windforce OC ° 8GB DDR3 RipjawsX ° 4x Viewsonic VA2703 ° Logitech G15 / G5 / G27 ° Razer Vespula ° TrackIR 5 ° Thrustmaster Warthog HOTAS

[quote]Now running Windows7 64bit on 5040x1050x59Hz!
Had to go to new Matrox software and Nvidia 182.50 Driver.. and it Runs..

Suspect it's now driver related..

182.5 is a Vista Driver.. had to force it to take it.. but it was not straight forward, So it's possible to do it, it's just not too easy..

Wouldn't run on 191.07? Mine is, but I know a heap of people for who it does not, such a mystery.

No way I could get it to run on 191.07 on mine I tried so many combinations..

Finally DisasterArea posted this..

"Nope - In the last 72 hours I've tried:
180.xx MS download released : FAIL
190.56 from guru3d (reported to work) FAIL
190.57 from Nvidia developer area : FAIL
190.62 (latest( FAIL
190.89 Guru3d beta relase : FAIL
190.56 Tweaktown : FAIL

182.5 PASS -

There was a trick to getting 182.5 to even install.
Remove the driverd in device manager and reboot - then when it has it will pick up 186.xx automagically - DO NOT REBOOT > leave the reboot requester on screen.

whilst this is up, right click your vid card in device manage, go update, then manually select the 182.5 driver from the folders it unpacks to when you run it (if you've not run it make sure it's set to run Vista SP1 compatibility).

That should do it.

In order to get the control panel and physx etc I downloaded the individual tools and phys x packages for them and intstalled.

Everything is sweet.

Unless I see a guide PROVING something newer works, I don't believe it, as I wasted three days trying to follow the others and they simply don't work."


I followed the instructions above and loaded the driver.. then ran the wizard.. I didn't pick the 5040 resolution instead i selected the 1440x900 it appeared to not complain about a windows error..

Reboot.. up in came. reconfig follwed the boot and it booted into a blank screen... nut's

I hit the reset button and rebooted again. this time it came up and displayed at the new resolution.

I reached for the change resolution slider in windows and there it was.. 5040 .. I selected it and the rest is History.. Now I'm staying where i am untill someone can guarantee a newer driver will work.

Nvidia..can I get a better driver and keep it running please :)


Thanks to DisasterArea that was the missing link for me.. now running on 3 Benq 2420HD Monitors..

Now I'm staying where i am untill someone can guarantee a newer driver will work.

It gets like that... :?

Glad you got it working in some capacity...

Still such a mystery, I'd love to crack it open. I still think it's something hardware related, as per other threads I have posted in, like mobo chipset or something silly like that, based on my experiences. Still, ideas haven't helped anyone else get onto 191.07 yet, so it's kind of fruitless. Plus my development of this simulator is about to finish and when I pass it on to the customer, I won't have a TH2G to test with any more.

_________________
i5-2500K @ 4Ghz ° Asus P8Z68 ° GTX670 Windforce OC ° 8GB DDR3 RipjawsX ° 4x Viewsonic VA2703 ° Logitech G15 / G5 / G27 ° Razer Vespula ° TrackIR 5 ° Thrustmaster Warthog HOTAS