Bump.
Is this in any way fixed? I'm using 2 DVI and one native displayport on a 5850 with the 10.3 beta drivers.
I get tearing/the line even with solid framerates and vsync on. It's only on my secondary monitors though...even though the primary one is DVI. Any ideas?
EDIT: My monitors ARE all set to 60Hz also.
Are all your monitors the same? Mine weren't and I found the only fix was to do a simple EDID edit. It was not an EDID flash or anything that could permanently damage your monitor so this process is not risky at all.
Required Programs:
Moninfo
Phoenix EDID Designer
Instructions-
Step 1:
Open Phoenix EDID Designer and click on Tools-> Extract Registry EDID...
Then it should come up with a list of monitors, double click one that is not giving you problems. Here is what mine looks like-
as you can see i selected my Acer monitor.
Step 2
Click on File-> Save EDID as... and save the name to whatever you want. I named mine AcerEDID. This will create a new .dat file which will be opened into Monifo.
Step 3
Open Moninfo and select File-> Open and navigate to your saved .dat file. Now click on File-> Create INF file. Keep it the same name (monitor.inf), and save to your documents folder.
Step 4
Right click desktop and click screen resolution (Make sure you're not in an eyefinity setup for this step) and select your problem monitor. Right click the monitor and select properties. Click on the Monitor tab, and then click the properties button from there.
You should now be at the properties for your problem monitor:
(mine already has the EDID override in place)
Step 5
Click on Driver tab. Then click on "Update driver..." then "Browse my computer for driver software" then "Let me pick..." then "Have Disk..." then "Browse". Now navigate to your documents folder, where the monitor.inf was saved. Select your "monitor.inf" and click open. Now select your EDID Overdrive from the list and click next.
Here is a more visual version of this step :) ----->
http://www.youtube.com/watch?v=QQSEjUeDyXk
I cancel all the windows because I have already done this, but for you hit next.
And your done! If i did not work, try setting the EDID Overdrive .inf file for all your monitors used in eyefinity. If it still does not work then i do not what will :?