Widescreen Gaming Forum

http://www.youtube.com/watch?v=XDDm2IholP8

http://www.youtube.com/watch?v=v_MAlRAhns0

8640x900 (?)



:hide

What displays are those? Take it they are two 1440x900 panels butted together within a single frame? Then three of them side by side with a 6 card?

That should be (correct me if i'm wrong) three Nec curved monitors (2880x900)

btw. Alienware has an equivalent product (also 2880x900)

Here's the topic on the Curved Monitors. http://www.widescreengamingforum.com/forum/viewtopic.php?f=9&t=17495&hilit=curved
There's a Link to a video of using 3 in triplehead.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |

I've sent a note off to ATI asking how the Ostendo folks got three curved displays working in Eyefinity.

Thinking again, those monitors must be two panels together but a single input going through their equivalent of a Dual Head 2 Go to do the split.

ladies and gentlemans

another achievement is done
I run 5 monitors setup in 32 bit inXP @ 8400x1050
of course without triplehead2go and other stuff like that (just bare pc hardware)
only 3 gpus
1x5770 + 2x9500GS :D
2+1+2 configuration

sadly it's not playable, reason - only 5770 gpu and another thing is on i7 and dirt2 sucks with multiple monitors so cant tested in game
(in next 3 weeks i should receive 5870 and amd mobo with 3 x pci-e so :D

I am sure I can run 6 monitors without any problem too, 3x2 or 6x1 also with 2x ati 5xxx gpus instead NV I can run 9 monitors 9:1 15120x1050 ultimate panorama as well
but this will be story for next thread :?

edit//
PICS
config


and rest

oh wow lol

so i have a 5970..

duniek - i have a few questions, does softh take some code/tweaking/installing to do? or is it just plug and play?
also, using geforce/radeon as a 2nd card for 4th and 5th monitors, does it use the gpu? or would it utilize the gpus on 5970 and output using 2nd auxilary card (radeon/geforce)?

im thinkin either another 5850 if it uses gpu or an old geforce card if its only used as auxilary output card..

multi-monitors ftw.

oh wow lol

so i have a 5970..

duniek - i have a few questions, does softh take some code/tweaking/installing to do? or is it just plug and play?
also, using geforce/radeon as a 2nd card for 4th and 5th monitors, does it use the gpu? or would it utilize the gpus on 5970 and output using 2nd auxilary card (radeon/geforce)?

im thinkin either another 5850 if it uses gpu or an old geforce card if its only used as auxilary output card..

multi-monitors ftw.

tweaking @ 5lcds in the same as tweaking @ 3 monitors when you using softTH
so in dirt2/fallout3/ - i only played in that two you need only change resolution in games files (in config file) and of course add 8400x1050 res in softTH file (in these 2 games it 1minute of work)
for example with mirrors edge no problem too but need FOV hack,

If you dont want play with drivers and dont want lost your mind with config I recomend use both ATI cards (5970 + even 4350 low end gpu or even hd1300) with two monitor outputs
in windows 7 when I used ati + nv I have a lot of problems with configuration

that was w7 config, if still have XP you need 3 gpus ;) (bcoz XP has limit max 2 monitors from each gpu)